|
|
Post by ulluze on Feb 2, 2020 15:27:01 GMT -5
Hi all,
I'm looking to replace my pinstriping on my 2001 Regal 2660. I haven't been able to find the factory (or close to) colours. Does anyone know where I can find it?
|
|
|
|
Post by gofast24 on Feb 22, 2020 11:36:52 GMT -5
Google it or e mail Regal with yr hull number and ask what pin stripping was used?
|
|
|
|
Post by sgilbert on Feb 22, 2020 12:09:21 GMT -5
I still have a zip lock with a lot of pin striping that came with my '00 2660. I have used bits & pieces over the years with good success, but, none the less, it's 20 years old.
|
|
|
|
Post by gofast24 on Feb 23, 2020 9:56:28 GMT -5
I still think you should research "marine" pinstriping, if you remove all the current stuff just find something close to what you have, remove the old , clean the hull where it was, and apply new pinstriping? I would clean off any old adhesive with "Goo Be Gone", then use rubbing alcohol to be safe, then apply new striping?
|
|
|
|
Post by gofast24 on Feb 23, 2020 9:57:56 GMT -5
I still think you should research "marine" pinstriping, if you remove all the current stuff just find something close to what you have, remove the old , clean the hull where it was, and apply new pinstriping? I would clean off any old adhesive with "Goo Be Gone", then use rubbing alcohol to be safe, then apply new striping? To me , pinstriping is from muscle cars from the 70's  |
|
|
|
Post by ulluze on Feb 23, 2020 18:23:12 GMT -5
I want to replace the 5/16" wide pinstripe that is above the rub rail. I think the factory colours are 1/8" Regal Antelope (code 121), and 1/16" gold metallic. Mine is quite sun bleached and I just want to freshen it up.
I have been searching online, but can't find anywhere that still have the Regal Antelope colour. I haven't tried a Regal dealer yet.
I may just go with black and gold, but thought I'd ask if anyone knew where I could find the factory colours.
|
|
|
|
Post by gofast24 on Feb 29, 2020 10:53:28 GMT -5
I would go with the black and gold (you didnt say where that was available from or th cost?), probably the OEM stuff will cost 10X what you can get a equivalent product that is just a touch off from the original pin striping? Good luck!
|
|
|
|
Post by ulluze on Mar 1, 2020 12:29:56 GMT -5
I still have a zip lock with a lot of pin striping that came with my '00 2660. I have used bits & pieces over the years with good success, but, none the less, it's 20 years old. Do you still have your 2660, or are you saying that you'd sell your leftover pinstriping? |
|
|
|
Post by sgilbert on Mar 1, 2020 14:22:15 GMT -5
ulluze, I still have my 2660, and use bits & pieces of my pin striping occasionally. It is mainly hunter green & gold; is that your color scheme??
|
|
|
|
Post by ulluze on Mar 1, 2020 20:50:14 GMT -5
Sgilbert, no my stripes are taupe and gold.
|
|
