moenc
New Member
Posts: 2
|
Post by moenc on May 29, 2020 18:37:47 GMT -5
When I fuel the boat, the fuel will “burp” out of the vent and the fuel fill. Sometimes it will “burp” at least a gallon or so. I have made sure the vent line is clear and has no sags in it and is above the fuel fill. I’m thinking there needs to be more vent capacity. Anyone have any thoughts or have the same problem??
|
|
|
|
Post by sgilbert on May 29, 2020 20:00:28 GMT -5
If you have the vent & fill in the same fixture, you have to install a new vent and re-route the vent hose to it in a constant upward route.
If already separate, then you need to move the vent hose further away from the fill hose on the tank itself.
|
|
moenc
New Member
Posts: 2
|
Post by moenc on May 29, 2020 20:17:59 GMT -5
They are not in the same fixture but I’ll have to look to see how far apart they are on the tank. Thank you for the tip.
|
|
