|
|
Post by regal3880 on Jul 14, 2020 17:01:57 GMT -5
My galley sink faucet hot side is running very slowly.
I'm thinking the valve cartridge is either clogged or
needs replacement.
Does anyone know the faucet / sink manufacturer before
I take the faucet apart?
I'm thinking it might be Scandvik and the hot water valve is
part #17011.
Thanks,
Joe.
|
|
|
|
Post by jnelson90 on Jul 15, 2020 11:18:36 GMT -5
I purchased replacement knobs for my sink on my 2006 3860 and the manufacturer was Scandvik.
|
|
|
|
Post by tc33obx on Jul 15, 2020 11:48:00 GMT -5
I will say that I was, well my wife was, unhappy with the galley faucet on my 4460 in addition to the fact it dripped. So I simply replaced the entire unit with a single handle smaller kitchen faucet with a pull out sprayer nozzle. It wasn't a difficult thing to do, and completely enhanced the galley sink capabilities. May be an easier way to solve the problem rather than hunting for parts. The only think I needed was a pex fitting to standard faucet thread adapter.
|
|
|
|
Post by gofast24 on Jul 16, 2020 10:56:46 GMT -5
Go to Regal Web site, select contact, give your hull number and ask for OEM faucet model and mfg. Pretty sure you will get a answer!
|
|
|
|
Post by regal3880 on Aug 13, 2020 14:48:59 GMT -5
Thanks for your replies. Yes, my galley faucet is a Scandvik Part #10422. I removed the hot side on/off knob, valve, spout and aerator and there is no obstruction. I will remove the stainless steel supply hose #17101 under the sink and look for an obstruction either in the hose itself or washer / screen, if there is one. (see attachment). The slow water running problem is in the galley hot side only and nowhere else. 10422-Drawing-NEW.pdf (106.2 KB) |
|
