|
|
Post by autobahn on Apr 22, 2021 15:01:48 GMT -5
I have twin Yammy 350 and it's plenty of power. A little hard finding an easy place for the boat hook. Gonna modify one for the bow locker. I was wondering where I was going to put that! Let me know how it works out. |
|
|
|
Post by tmuller on Apr 22, 2021 15:57:00 GMT -5
Absolutely love to share. More to come as we settle in with her.
1. Didn't notice. I'll look this weekend. Wasn't an issue. It has the 50 anniversary on the back starboard so they all think it's 50' HA! Lots of compliments at the docks.
2. Great ride in wind, rough and cross wake. I don't run 50kts so it's not the hard. 4k rpm is a nice 30 kits. No need to trim engines. Keep them full down. Use Bennet trim tabs three lights down to keep the nose down. She runs perfectly in that setup.
3. I love the single screen. The Yamaha screen has it's own independent sat receiver as a true backup chart.
4. Never looked at the Yamaha screen running. All I need is on the chart plotter. Perhaps I there was an error code I would go there.
5. Yes radar overlay is good. I'm not looking for birds to fish. Just other boats and markers. Didn't have weather yet to see how it performs.
6. Grid will be above the stereo and left of the switches. I think this is a GREAT feature. It has a knob for zoom instead of your fingers and 4 present buttons you can easily assign to a screen. It's was not good to reach over the wheel to find the home button and then three other touches to change screens.
|
|
|
|
Post by autobahn on Apr 24, 2021 17:54:25 GMT -5
I have twin Yammy 350 and it's plenty of power. A little hard finding an easy place for the boat hook. Gonna modify one for the bow locker. tmuller: What about under the rear ultra lounge? Here's a pic of what I'm talking about I found on line. It might have to be a telescoping pole but maybe not . . .  |
|
|
|
Post by tmuller on Apr 27, 2021 11:32:42 GMT -5
Well that's not that easy to do. Especially when coming in to dock. You must put the back rest flat. Not a simple task and then lift up the bottom which is a bit hard. I've decided to use the locker for the isinglass enclosure.
|
|
