|
|
Post by coolchange on Jun 16, 2021 14:24:59 GMT -5
I recently purchased a 2004 Regal Commodore. Interior lighting appears to be "puck" type fixtures. cand anyone advise how to change/repair these without destroying the fixture or surrounding area. i read on line that they pull out (clips on springs) but i applied alot of force and they dont seem to come out. Thanks for any help with this -Tim
|
|
|
|
Post by hawker63 on Jun 16, 2021 14:48:34 GMT -5
If it’s the ones in the hardtop, I had destroy to remove them. I had planned on replacing anyway but the spring wasn’t a spring. If inside the cabin, I haven’t tried yet despite my wife’s wish that I change them
|
|
|
|
Post by sgilbert on Jun 16, 2021 15:04:42 GMT -5
About 3" round? Twist off.
|
|
|
|
Post by gofast24 on Jun 17, 2021 10:18:29 GMT -5
About 3" round? Twist off. Yes, chrome plated plastic bezel, chrome flaking off? Twist CCW to get lens off, then bulb can be replaced with LED! picture would sure help? |
|
|
|
Post by goldenarch on Jun 22, 2021 9:33:09 GMT -5
On my 4460, the interior 'puck style lights' and cockpit flush lighting all can be taken apart by popping the light disc off carefully with a small, flat screwdriver! This accesses the bulbs, which I have changed out with LEDs, greatly reducing electrical draw.
|
|
