estam
New Member
Posts: 3
|
Post by estam on Sept 8, 2021 21:57:30 GMT -5
Any sugestions where to find a driver's side windshield replacement for a venture 8.3.
|
|
|
|
Post by gofast24 on Sept 12, 2021 10:45:18 GMT -5
E mail or call Regal with hull number
|
|
estam
New Member
Posts: 3
|
Post by estam on Sept 12, 2021 21:27:51 GMT -5
1993 Model, no luck. Totally discontinued.
|
|
|
|
Post by tc33obx on Sept 13, 2021 11:12:57 GMT -5
Is the frame shot or just the glass. You might be able to have someone replace the glass/plexiglass with the existing frame. The other option would be have a custom frame made for the entire windshield which would probably be very expensive.
|
|
|
|
Post by kdubya on Sept 14, 2021 8:01:32 GMT -5
TaylorMade probably made the original glass. Contact them and see if they are willing to do a special order.
|
|
|
|
Post by gofast24 on Sept 15, 2021 10:05:24 GMT -5
TaylorMade probably made the original glass. Contact them and see if they are willing to do a special order. Tried that with a shattered front center electrically opening vent window, 18" X 24" or so. Curved every direction! Was advised about $2400 and 4 months lead time. Bought a 5/16" piece of lexan , cut and drilled holes for hinges etc. When pulled in by actuator it conforms enough to seal along seals in frame. $42 and a little work. |
|
wjh
Full Member
Posts: 51
|
Post by wjh on Sept 16, 2021 7:18:49 GMT -5
I don't know what size glass you have, but vacuum forming lexan or polycarbonate may work. See attached video Plenty of videos on YouTube with people making custom parts this way.
I know most don't have an oven that size, but there are other ways to heat the plastic and get it to form.
|
|
