mike
New Member
Posts: 3
|
Post by mike on Mar 11, 2021 13:50:55 GMT -5
Has anyone installed phender pro on their boat? If so lets see some photos of install....
|
|
|
|
Post by rlazar on Mar 11, 2021 14:22:09 GMT -5
I did. Installed on a 2015 32 Express that I ordered new but didn't order the fender clips because I didn't know about them.
I ended up ordering the Phender Pro from Regal BUT could have just as easily ordered the Phender Pro OEM installed clips.
We used new drill bits, taped the hull and started with smaller bits and worked our way up. Hardest part was finding a good install location so we had access to the backside in order to install the large washer and lugnut and get a wrench on it. In the end, the location as almost exactly OEM or very close to it. Used the clips for the 4 years I had the boat and absolutely loved them. Feel free to send me a message with your phone# or email and I'll send you some videos/pics of the install. Rob
|
|
|
|
Post by gofast24 on May 4, 2021 10:05:39 GMT -5
Why not just post some pic's for all to sea? Need some traffic here  |
|
|
|
Post by lakecitystorage on Mar 15, 2022 13:00:22 GMT -5
Getting ready to install some additional Phendro Pro Receiver Pins on my 2022 LS2. Does anyone know what size the factory installed ones are? 3/8 inch or 1/2 inch? Thanks!
|
|
|
|
Post by lakecitystorage on Aug 1, 2022 12:45:11 GMT -5
Hey Mike. I ordered my boat with two phender clips on each side of the boat. I was so impressed with how easy they were to use that I installed two more on each side of the boat. One of the new installs I spaced halfway between the two factory installed ones. The second new install I placed the same distance toward the bow of the boat. I sent Regal the locations that I was going to drill and they were kind enough to verify that there was not a problem with drilling that area. Hope that makes sense. Phendro also has a tool that allows you to install the pins without having to gain access from underneath. Install worked out very well. These things are awesome when using the flat boat fenders. Good luck.....................
|
|
