|
|
Post by tmuller on May 31, 2021 17:21:43 GMT -5
Apparently Fusion, by Garmin, will not let you upgrade firmware via bluetooth. On the fusion app, you can download it, but cannot transfer file to head unit. Anyone resolved this without pulling out the head unit to access the USB?
|
|
|
|
Post by rlazar on May 31, 2021 18:19:56 GMT -5
You have to do it via WiFi.
|
|
|
|
Post by tmuller on Jun 1, 2021 6:40:48 GMT -5
I don't believe the model installed supports wifi
|
|
|
|
Post by rlazar on Jun 1, 2021 7:14:09 GMT -5
I don't believe the model installed supports wifi What model do you have? |
|
|
|
Post by rlazar on Jun 1, 2021 7:31:56 GMT -5
I see you have the Fusion RA670. Looks like that does not have the built in Wifi. My 38XO came with the RA770 which does. Only a few hundred $ difference so I wonder why Regal switched that on the 36? It would be nice if at least they gave you a choice.
|
|
|
|
Post by xixp on Jun 1, 2021 12:01:07 GMT -5
What i did in my Sc35 after i upgraded to a 700 series head (it didnt have wifi built in, only wired ethernet) was to add an small ethernet wifi bridge module . (It feeds from the rear HU usb port ) .
Therefore now the Fusion connects via wifi to the Garmin Chartplotter that acts like the main boat router. My phone connects via BT and WIFI(through the Garmin) to the Fusion .
|
|
