|
Post by adamdgold on Jul 4, 2021 18:36:27 GMT -5
Had a weird problem pop up a few times today. Only happens right after I start up the boat, but my port engine starts up trimmed up and won’t let me trim it down, making it like I am only driving with one engine. On my chart plotter it says it’s trimmed down to -7, but won’t move when I try the power trim buttons. After a while it actually comes back and on the screen it pops up as +17 in orange. Then I can trim it back down manually with the button. Super weird and wondering if anyone had any experience with this. I think maybe it’s a computer sensor or something like that as mechanically when it allows me the button is able to trim it up and down. Of course no one is at my marina to fix until after the 4th, so I’m out of luck until Tuesday (hopefully they will be able to look right away). Thanks!
|
|
|
Post by adamdgold on Jul 10, 2021 5:57:59 GMT -5
For anyone interested I did get this problem fixed. It ended up being the trim sensor. They had to haul the boat to replace it.
|
|
|
Post by gofast24 on Jul 10, 2021 10:48:08 GMT -5
Thanks for indicating problem and fix!
|
|