|
|
Post by captron on Sept 5, 2021 20:53:54 GMT -5
I have a Volvo penta 350 hp I/O. I started the boast and soon after I left the dock the engine alarm came on. Temp gauge at 200. I opened the hatch and seen that my flush bib was not screwed on in the engine bay. Tighten the flush bib cap and it’s still overheating. Any suggestions..
thank you
|
|
|
|
Post by captron on Sept 6, 2021 12:40:16 GMT -5
Just to add to this issue. If I do a freshwater flush the engine temp is normal. Drop down into the water and she overheats in a few min. All intakes seem to be clean and unobstructed. Help
|
|
|
|
Post by lg260ss on Sept 6, 2021 20:12:03 GMT -5
First thing I would do is replace the impeller. The impeller needs to be replaced at least every other year and if they ever suck air they can be damaged.
|
|
|
|
Post by captron on Sept 7, 2021 6:45:19 GMT -5
Thank You… the engine bay is way too tight for me. So I’ll have that done soon. Thanks again
|
|
