|
Post by hawker63 on Jun 6, 2023 7:24:23 GMT -5
We took our Regal 4460 for a trip this weekend. Whe. We were entering the locks after running at 3500 rpm for 4 hours, we slowed to idle. The port engine twice increased its rpm from 900 to 1400 for about 2 seconds before returning to idle. Any thoughts on what may cause this?
|
|
kboxx
Junior Member
Posts: 12
|
Post by kboxx on Jun 6, 2023 14:03:56 GMT -5
You might check the IAC valve. They are not hard to test or difficult to replace.
|
|