Shore power 50 amp not working |

boat1960
New Member

Posts: 1

Shore power 50 amp not working Jul 4, 2023 10:37:47 GMT -5 via mobile

Quote

Post by boat1960 on Jul 4, 2023 10:37:47 GMT -5

2009 Regal 4460 50 Amp
Can’t find shore power breaker? Generator and AC power working fine. No power when I switch to shore power. It was working for a while then lost power. I verified the power source is working.

Zane
Full Member

Posts: 75

Shore power 50 amp not working Jul 4, 2023 10:50:31 GMT -5

Quote

Post by Zane on Jul 4, 2023 10:50:31 GMT -5

Mine has a breaker under each shore power cord connection, starboard side in the compartment. But if you have the glendinning cable retractor, I think the breakers are moved to inside the engine room somewhere closish to the power cord input.

Regal 4160 V-drive Cummins 6BTA's
Previous boats
Regal 2665 VP 5.7gxi

tc33obx Senior Member Posts: 383	Shore power 50 amp not working Jul 4, 2023 15:42:27 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by tc33obx on Jul 4, 2023 15:42:27 GMT -5 I agree with Zane. My 4460 had twin 30amps with Glendennings and the cable connectors and breakers were in the engine room I believe at the top of the ladder if I remember right.
	- Tom Boating Area - Southern Jersey Shore Cape May to Sea Isle with an odd trip to the Chesapeake Bay from time to time. * 2020 Regal 33 OBX with twin 300 HP Yamahas * 2006 Regal 4460 w IPS500s and Joystick - Traded on 2020 33OBX * 2003 Monterey 322 - Traded for 2006 4460 * 1996 Bryant 210 w5.7l Mercruiser Alpha Fully Restored - Still Have

Shore power 50 amp not working

Post by boat1960 on Jul 4, 2023 10:37:47 GMT -5

Post by Zane on Jul 4, 2023 10:50:31 GMT -5

Post by tc33obx on Jul 4, 2023 15:42:27 GMT -5